Golden marble
Golden Sinai Marble
Also sold as Sinai Gold
Deep gold with mineral drift and a dense crystal.
Get a quote on Golden Sinai — WhatsApp
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day
Drag the slab to turn it, or use the arrow keys. Switching finish re-renders the surface — polished throws a hard specular, the abraded finishes open the surface up and knock the colour back.
Golden Sinai is a deep gold with a dense crystal, and the one gold on this list finished for outside work. The ground carries irregular mineral drift — not banding, and not a repeating figure, so panels will not sequence into a pattern across an elevation. The colour is the other reason it goes outside: it holds in direct desert and Mediterranean sun rather than bleaching back over a season. The finish list runs past the interior faces into sandblasted and bush-hammered, which is what paving and a pool surround actually need, and steps are supplied as a format. Inside, polished and honed both work, though a polish on a gold this saturated is a decision about the room rather than a neutral default. Availability is medium, so an elevation quantity is better fixed early in a programme than late.
Hashma Beige is the other marble we finish for external work, but it is a beige and we do not offer it polished. Golden Sinai keeps the polish, so the same stone can run from external paving straight into an interior floor.
- Material
- Marble
- Colour
- Golden
- Origin
- Sinai Peninsula
- Availability
- Medium
- Finishes
- Polished, Honed, Brushed, Sandblasted, Bush-hammered
- Formats
- Blocks, Gangsaw slabs, Tiles, Cut-to-size, Steps and risers
Send your finish and thickness on WhatsApp Request a quote for Golden Sinai Request a sample
Samples are 10 × 10 cm as standard and go out by courier.
Photographs
Golden Sinai in the yard
Photographs of our own blocks, slabs and finished work. Slab photography shows one slab — the block it came from is what you are quoted against.
Laid out
Golden Sinai across a floor
A photograph shows one slab on a stand. This shows the stone tile after tile — where the pattern repeats, how far the tone drifts across a batch, and what the joint does to it. Every tile here is cut from a different part of the surface, the way material comes out of a real crate.
Indicative layout. Tone drift is deliberate — no two tiles from one batch match exactly, and a laid floor should never look like one photograph repeated.
In the room
Golden Sinai against your wall colour
Nobody buys stone on a white background. Put Golden Sinai on the floor, up the wall or across a worktop, set the colour it will actually sit against, and change the light — the same three questions every client asks on a site visit, answered before the sample ships.
A scene, not a render of your project: proportions are indicative and colour on a screen is never the colour in a room. Send us the drawings and we will lay the real slab sizes out against your setting-out.
Surface
Golden Sinai, close up
The slab above turns; this is the same stone at the size it sits in your hand. Change the finish and it re-cuts.
Roughly a 130 mm span of Golden Sinai, polished. A rendered preview, not a photograph of stock — ask for a physical sample before you specify.
Specified for
Where Golden Sinai is used
- Facades
- Feature walls
- External paving
- Interior flooring
- Pool surrounds
Suitability depends on the finish, the thickness and the exposure. If you are specifying for external cladding, wet areas or heavy traffic, send us the detail and we will tell you what we would put in that position.
Technical
Egyptian beige / cream marble — typical range
| Property | Typical value | Standard |
|---|---|---|
| Bulk density | 2,600 – 2,720 kg/m³ | EN 1936 |
| Water absorption | 0.10 – 0.45 % | EN 13755 |
| Compressive strength | 70 – 110 MPa | EN 1926 |
| Flexural strength | 8 – 14 MPa | EN 12372 |
| Abrasion resistance | 20 – 26 mm | EN 14157 |
| Frost resistance | Passes 48 cycles (selected stones) | EN 12371 |
| Mohs hardness | 3 – 4 | — |
| Reaction to fire | Class A1 | EN 13501-1 |
These are indicative ranges for this stone family, published so you can size a design early. They are not a test certificate. For the stone you select we arrange water absorption, flexural strength and abrasion tests at an accredited laboratory before you close a specification.
Formats
How Golden Sinai is supplied
Blocks
Quarry blocks selected and squared. Typical 2.6 – 3.0 × 1.5 × 1.5 m, 18 – 30 tonnes. Sold by m³, loaded on flat rack or in-container with steel cradles.
Gangsaw slabs
Full-size slabs from the gangsaw. Marble typically 2.6 – 3.0 × 1.6 – 1.9 m in 2 cm and 3 cm; granite 2 cm and 3 cm. Bundled by block so vein sequence is preserved.
Tiles
Calibrated tiles in 30×30, 30×60, 40×40, 60×60, 60×120 cm and free length, 1.0 – 3.0 cm. Edges straight-cut or bevelled, back-mesh on request.
Cut-to-size
Worked to your drawings — worktops, vanity tops, cladding panels, mitres, cut-outs, drainage grooves, undermount polishing. Supplied piece-marked to a setting-out plan. How a cut-to-size order runs
Steps and risers
Treads with bullnose, half-bullnose or eased edge, anti-slip grooving on request, matched risers and stringers.
Also in marble
Stones that sit alongside it
Golden Cream Flower
The cross cut of Golden Cream — open, flowering figure.
Eastern Desert360° →
Sunny Menia
Golden honey ground with fine horizontal movement.
Minya Governorate360° →
Sunny Dark
The deeper, amber end of the Sunny bed.
Minya Governorate360° →
Sunny Oro
The richest gold in the Sunny family.
Minya Governorate360° →
Asked about this stone
Golden Sinai — questions buyers ask
Can you supply it flamed?
No. Flaming is a granite process — the thermal shock damages marble — so the anti-slip faces we produce in Golden Sinai are sandblasted and bush-hammered, with brushed as the lighter option.
Will a facade sequence panel to panel?
No. The mineral drift is irregular rather than directional, so there is no vein run to carry across an elevation. Cut-to-size goes out piece-marked to a setting-out plan, so the panel sequence can be fixed on paper before anything is fixed on the building.
Which finish for a pool surround?
Sandblasted or bush-hammered — both are on the list for this stone. Bush-hammered is the more aggressive of the two and suits ramps and heavy external traffic; sandblasted gives an even matt texture without that coarseness underfoot.
Is there enough for a whole elevation?
Availability is medium rather than continuous, so a facade quantity should be ordered in one go instead of phased. Give us the total area at enquiry rather than after the first shipment.
Get a quote on Golden Sinai.
Send the stone, the finish, the thickness and the destination port. You get a quote with an FOB and a CIF price, a lead time and photographs of the actual material.
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day