White quartz
Super White
Also sold as Q-110
Bright white with a fine crystalline sparkle.
Get a quote on Super White — WhatsApp
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day
Drag the slab to turn it, or use the arrow keys. Switching finish re-renders the surface — polished throws a hard specular, the abraded finishes open the surface up and knock the colour back.
Super White is the same white ground as Pure White with a fine crystalline aggregate worked through it, and the aggregate is the point: it returns light rather than absorbing it, so the surface stays bright in a room that has little daylight of its own. There is still no vein and nothing to line up. What the flecking adds is texture, and texture is forgiving — crumbs, water spots and the ordinary mess of a working counter break up against it instead of sitting on an empty field. Under downlights or shop track lighting the sparkle is obvious; under flat daylight it settles and reads as a slightly cooler, harder white than Pure White. Retail counters are on its application list, and that kind of lighting is where the difference between the two whites shows most. Polished is where the aggregate does its work; honed keeps the grain but loses the sparkle.
Carrara Mist is the next step if the brief wants brightness with some movement — a soft grey drift rather than a sparkle. Super White has no figure at all: the interest is in the grain, not in the pattern.
- Material
- Quartz
- Colour
- White
- Origin
- Engineered quartz
- Availability
- Made to order — standard programme
- Finishes
- Polished, Honed
- Formats
- Gangsaw slabs, Cut-to-size
Send your finish and thickness on WhatsApp Request a quote for Super White Request a sample
Samples are 10 × 10 cm as standard and go out by courier.
Photographs
Super White in the yard
We are photographing this material now. Until the shoot is done, the turning slab and the close-up below are renderings, and the honest answer to “what does it actually look like” is a sample in your hand.
No photographs yet. Ask us for the current slab and block photographs of Super White — we shoot them on request, in the yard, with a scale in frame. A cut sample goes out by courier the same week.
Laid out
Super White across a floor
A photograph shows one slab on a stand. This shows the stone tile after tile — where the pattern repeats, how far the tone drifts across a batch, and what the joint does to it. Every tile here is cut from a different part of the surface, the way material comes out of a real crate.
Indicative layout. Tone drift is deliberate — no two tiles from one batch match exactly, and a laid floor should never look like one photograph repeated.
In the room
Super White against your wall colour
Nobody buys stone on a white background. Put Super White on the floor, up the wall or across a worktop, set the colour it will actually sit against, and change the light — the same three questions every client asks on a site visit, answered before the sample ships.
A scene, not a render of your project: proportions are indicative and colour on a screen is never the colour in a room. Send us the drawings and we will lay the real slab sizes out against your setting-out.
Surface
Super White, close up
The slab above turns; this is the same stone at the size it sits in your hand. Change the finish and it re-cuts.
Roughly a 130 mm span of Super White, polished. A rendered preview, not a photograph of stock — ask for a physical sample before you specify.
Specified for
Where Super White is used
- Kitchen tops
- Vanity tops
- Splashbacks
- Retail counters
Suitability depends on the finish, the thickness and the exposure. If you are specifying for external cladding, wet areas or heavy traffic, send us the detail and we will tell you what we would put in that position.
Technical
Engineered quartz — typical range
| Property | Typical value | Standard |
|---|---|---|
| Quartz content | 90 – 93 % by weight | — |
| Bulk density | 2,300 – 2,450 kg/m³ | EN 14617-1 |
| Water absorption | ≤ 0.05 % | EN 14617-1 |
| Flexural strength | 40 – 60 MPa | EN 14617-2 |
| Abrasion resistance | ≤ 32 mm | EN 14617-4 |
| Stain resistance | Class 5 (non-porous) | EN 14617-13 |
| Mohs hardness | 6 – 7 | — |
| Slab format | 3200 × 1600 mm · 12 / 20 / 30 mm | — |
These are indicative ranges for this stone family, published so you can size a design early. They are not a test certificate. For the stone you select we arrange water absorption, flexural strength and abrasion tests at an accredited laboratory before you close a specification.
Formats
How Super White is supplied
Gangsaw slabs
Full-size slabs from the gangsaw. Marble typically 2.6 – 3.0 × 1.6 – 1.9 m in 2 cm and 3 cm; granite 2 cm and 3 cm. Bundled by block so vein sequence is preserved.
Cut-to-size
Worked to your drawings — worktops, vanity tops, cladding panels, mitres, cut-outs, drainage grooves, undermount polishing. Supplied piece-marked to a setting-out plan. How a cut-to-size order runs
Also in quartz
Stones that sit alongside it
Asked about this stone
Super White — questions buyers ask
Does the sparkle survive a honed finish?
Polished is where the crystalline aggregate does its work. Honed still shows the grain, but the light-catching goes flat — if brightness is why you chose it over Pure White, specify polished.
Is there any pattern to match between pieces?
No. There is no vein and no direction to it; the aggregate is worked through the whole body, so pieces can be cut and turned whichever way suits the slab.
Why pick it over Pure White for a counter?
The fine flecking breaks up water spots, dust and crumbs that show plainly on a flat white. On a retail counter or a kitchen top that people lean on all day, that is the practical argument.
Can I use both whites in the same job?
Yes — they are built on the same white ground, so a Super White counter with a Pure White splashback reads as a change of surface rather than a change of colour. Order them together if the two whites need to sit exactly.
Get a quote on Super White.
Send the stone, the finish, the thickness and the destination port. You get a quote with an FOB and a CIF price, a lead time and photographs of the actual material.
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day