Drag the slab to turn it, or use the arrow keys. Switching finish re-renders the surface — polished throws a hard specular, the abraded finishes open the surface up and knock the colour back.
Grey quartz
Concrete Grey
Also sold as Q-540
Matt mid grey with a cast-concrete cloud.
A honed mid grey with soft tonal cloud, engineered to read like poured concrete without the maintenance. Best specified honed; the polished version loses the effect.
- Material
- Quartz
- Colour
- Grey
- Origin
- Engineered — Wesha quartz line, Cairo
- Availability
- Made to order — standard programme
- Finishes
- Honed, Polished
- Formats
- Gangsaw slabs, Cut-to-size
Request a quote for Concrete Grey
Samples are 10 × 10 cm as standard and go out by courier within two working days.
Photographs
Concrete Grey in the yard
We are photographing this material now. Until the shoot is done, the turning slab and the close-up below are renderings, and the honest answer to “what does it actually look like” is a sample in your hand.
No photographs yet. Ask us for the current slab and block photographs of Concrete Grey — we shoot them on request, in the yard, with a scale in frame. A cut sample goes out by courier the same week.
Laid out
Concrete Grey across a floor
A photograph shows one slab on a stand. This shows the stone tile after tile — where the pattern repeats, how far the tone drifts across a batch, and what the joint does to it. Every tile here is cut from a different part of the surface, the way material comes out of a real crate.
Indicative layout. Tone drift is deliberate — no two tiles from one batch match exactly, and a laid floor should never look like one photograph repeated.
Surface
Concrete Grey, close up
The slab above turns; this is the same stone at the size it sits in your hand. Change the finish and it re-cuts.
Roughly a 130 mm span of Concrete Grey, honed. A rendered preview, not a photograph of stock — ask for a physical sample before you specify.
Specified for
Where Concrete Grey is used
- Kitchen tops
- Commercial counters
- Wall cladding
- Table tops
- Bar tops
Suitability depends on the finish, the thickness and the exposure. If you are specifying for external cladding, wet areas or heavy traffic, send us the detail and we will tell you what we would put in that position.
Technical
Engineered quartz — typical range
| Property | Typical value | Standard |
|---|---|---|
| Quartz content | 90 – 93 % by weight | — |
| Bulk density | 2,300 – 2,450 kg/m³ | EN 14617-1 |
| Water absorption | ≤ 0.05 % | EN 14617-1 |
| Flexural strength | 40 – 60 MPa | EN 14617-2 |
| Abrasion resistance | ≤ 32 mm | EN 14617-4 |
| Stain resistance | Class 5 (non-porous) | EN 14617-13 |
| Mohs hardness | 6 – 7 | — |
| Slab format | 3200 × 1600 mm · 12 / 20 / 30 mm | — |
These are indicative ranges for this stone family, published so you can size a design early. They are not a test certificate. Ask us for the current EN or ASTM report on the specific batch before you close a specification.
Formats
How Concrete Grey is supplied
Gangsaw slabs
Full-size slabs from the gangsaw. Marble typically 2.6 – 3.0 × 1.6 – 1.9 m in 2 cm and 3 cm; granite 2 cm and 3 cm. Bundled by block so vein sequence is preserved.
Cut-to-size
Worked to your drawings — worktops, vanity tops, cladding panels, mitres, cut-outs, drainage grooves, undermount polishing. Supplied piece-marked to a setting-out plan.
Also in quartz
Stones that sit alongside it
Get a price on Concrete Grey.
Send the stone, the finish, the thickness and the destination port. You get a quote with an FOB and a CIF price, a lead time and photographs of the actual material.