Red granite
Red Aswan Dark Granite
Also sold as Aswan Red Dark · Deep Royal Red
جرانيت أحمر أسوان غامق — الصفحة بالعربية
The deep oxblood grade, with heavy black mineral.
Get a quote on Red Aswan Dark — WhatsApp
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day
Drag the slab to turn it, or use the arrow keys. Switching finish re-renders the surface — polished throws a hard specular, the abraded finishes open the surface up and knock the colour back.
Red Aswan Dark is not a separate quarry. It is the dark selection off the same Aswan bed that gives Aswan Red — blocks where the feldspar runs oxblood rather than red-pink and the black amphibole comes in heavy enough to close the ground down. That depth is the whole reason to buy it, and it sets the working limits. Because it is a selection and not a bed of its own, how far down a block sits varies, which is why it is sold for monuments, memorial work and dark bands rather than for holding one tone across a whole elevation. The abraded finishes work against it: flaming and bush-hammering open the surface and take the red back toward grey. Kept polished, honed or leathered, it holds. It is cut as tiles, cut-to-size, steps and kerbs but not as cobbles, so a matching red sett line has to come from Aswan Red.
Aswan Red is the mid grade of the same bed and Red Aswan Light the pale, pink-leaning one chosen when a whole elevation is granite; the dark grade carries more black and less pink than either. It is also the narrower supply of the three — High against their Very high — and it is the only one of them not offered sandblasted or cut as cobbles.
- Material
- Granite
- Colour
- Red
- Origin
- Aswan, Upper Egypt
- Availability
- High
- Finishes
- Polished, Honed, Flamed, Leathered, Bush-hammered
- Formats
- Blocks, Gangsaw slabs, Tiles, Cut-to-size, Steps and risers, Kerbs and landscape
Send your finish and thickness on WhatsApp Request a quote for Red Aswan Dark Request a sample
Samples are 10 × 10 cm as standard and go out by courier.
Photographs
Red Aswan Dark in the yard
Photographs of our own blocks, slabs and finished work. Slab photography shows one slab — the block it came from is what you are quoted against.
Laid out
Red Aswan Dark across a floor
A photograph shows one slab on a stand. This shows the stone tile after tile — where the pattern repeats, how far the tone drifts across a batch, and what the joint does to it. Every tile here is cut from a different part of the surface, the way material comes out of a real crate.
Indicative layout. Tone drift is deliberate — no two tiles from one batch match exactly, and a laid floor should never look like one photograph repeated.
In the room
Red Aswan Dark against your wall colour
Nobody buys stone on a white background. Put Red Aswan Dark on the floor, up the wall or across a worktop, set the colour it will actually sit against, and change the light — the same three questions every client asks on a site visit, answered before the sample ships.
A scene, not a render of your project: proportions are indicative and colour on a screen is never the colour in a room. Send us the drawings and we will lay the real slab sizes out against your setting-out.
Surface
Red Aswan Dark, close up
The slab above turns; this is the same stone at the size it sits in your hand. Change the finish and it re-cuts.
Roughly a 130 mm span of Red Aswan Dark, polished. A rendered preview, not a photograph of stock — ask for a physical sample before you specify.
Specified for
Where Red Aswan Dark is used
- Monuments
- Facades
- External paving
- Kitchen tops
- Stairs
Suitability depends on the finish, the thickness and the exposure. If you are specifying for external cladding, wet areas or heavy traffic, send us the detail and we will tell you what we would put in that position.
Technical
Egyptian granite — typical range
| Property | Typical value | Standard |
|---|---|---|
| Bulk density | 2,600 – 2,780 kg/m³ | EN 1936 |
| Water absorption | 0.05 – 0.40 % | EN 13755 |
| Compressive strength | 130 – 220 MPa | EN 1926 |
| Flexural strength | 10 – 18 MPa | EN 12372 |
| Abrasion resistance | 12 – 18 mm | EN 14157 |
| Frost resistance | Passes 48 cycles | EN 12371 |
| Mohs hardness | 6 – 7 | — |
| Reaction to fire | Class A1 | EN 13501-1 |
These are indicative ranges for this stone family, published so you can size a design early. They are not a test certificate. For the stone you select we arrange water absorption, flexural strength and abrasion tests at an accredited laboratory before you close a specification.
Formats
How Red Aswan Dark is supplied
Blocks
Quarry blocks selected and squared. Typical 2.6 – 3.0 × 1.5 × 1.5 m, 18 – 30 tonnes. Sold by m³, loaded on flat rack or in-container with steel cradles.
Gangsaw slabs
Full-size slabs from the gangsaw. Marble typically 2.6 – 3.0 × 1.6 – 1.9 m in 2 cm and 3 cm; granite 2 cm and 3 cm. Bundled by block so vein sequence is preserved.
Tiles
Calibrated tiles in 30×30, 30×60, 40×40, 60×60, 60×120 cm and free length, 1.0 – 3.0 cm. Edges straight-cut or bevelled, back-mesh on request.
Cut-to-size
Worked to your drawings — worktops, vanity tops, cladding panels, mitres, cut-outs, drainage grooves, undermount polishing. Supplied piece-marked to a setting-out plan. How a cut-to-size order runs
Steps and risers
Treads with bullnose, half-bullnose or eased edge, anti-slip grooving on request, matched risers and stringers.
Kerbs and landscape
Granite kerbs, channels, edging and setts to European and Gulf highway profiles. Kerb sections and metres per container
Also in granite
Stones that sit alongside it
Asked about this stone
Red Aswan Dark — questions buyers ask
Will Red Aswan Dark hold one tone across a large elevation?
Not reliably. It is a dark selection taken out of the Aswan bed rather than a bed of its own, so the depth of the oxblood varies block to block. For a single-tone elevation use Aswan Red or Red Aswan Light and keep the dark grade for bands, plinths and monumental work.
Which finish keeps the colour deepest?
Polished, then honed. Flamed and bush-hammered open the surface and knock the red back toward grey, which defeats the reason most buyers choose this grade over Aswan Red. It is not offered sandblasted at all.
Is it a sensible choice for kitchen worktops?
Kitchen tops are a listed use, and leathered is cut in this stone alongside polished and honed. On a ground this dark that is worth asking about — a polished dark granite shows water marks and fingerprints that a leathered surface hides.
Can I run paving, steps and setts all in this stone?
Paving, stairs, steps and kerbs yes — all are listed or cut. Cobbles are not, so if the scheme needs setts in the same red they have to come from Aswan Red, which carries the full landscape format set.
Get a quote on Red Aswan Dark.
Send the stone, the finish, the thickness and the destination port. You get a quote with an FOB and a CIF price, a lead time and photographs of the actual material.
We reply within one working day · Saturday – Thursday, 08:00 – 18:00 Cairo time · WhatsApp +20 106 926 2572
Family business since 1991 · Factory in Alexandria · 50 % in advance · 30 % on approval after production · 20 % before shipping · Reply within one working day